Proudly located in the United Sates of America
Left Rear 18" Preloader Complete Package
The Zeta Performance spring preloader was designed with dirt late models in mind.
Made of stronger aluminum and finished with a much harder surface coating, these preloaders are designed for the harshest of environments and to survice when the others fail!
The Zeta preloader can travel an industry-leading 6" to ensure you can reach both your target extended loads and lowest possible ride height.
The preloader features a 10 thread-per-inch adjuster thread to allow for easily keeping track of droop load when adjusted on the car.
This package comes COMPLETELY ASSEMBLED and ready to put on your left rear shock!
- Draco spring of your choice
- C18.3.5.050 or C18.3.5.065 - Retail $150
- Spring Preloader Assembly
- ZP-ASSY-PL-18-3-5-SEAL - Retail $539
- Dual use for 18" x 3.5" springs AND 16" x 3"
- 3" Coilover Thrust Bearing
- Draco COB-3000 Retail $29.25
- 2.5"-3" Adapter
- Draco ADP126.96.36.199 Retail $17.50
Total Retail Value: $735.75
Typical use (Dirt LM):
Preloader will come assembled with spring of choice
Install preloader on the left rear shock in place of the spring/stack.
With the shock at droop eye to eye (as measured hanging on the car), set the ride height nut to 1/8" gap from the preloader.
Using a load machine, compress the shock 1/4" from droop eye to eye and set your extended load
Install on the car and verify 1/8" gap between preloader and adjuster nut when hanging on the car.
To adjust droop load, adjust the load using the nut on the preloader, NOT the shock.
Only adjust the adjuster nut on the shock when making bar changes that change the gap between the preloader and the shock adjuster nut. VERIFY GAP EVERY TIME YOU MOVE BARS ON THE LR.
For all email inquiries please contact Andrew May at email@example.com